Build a bootable Ubuntu USB with Startup Disk Creator

Startup Disk Creator is Ubuntu’s straightforward tool for turning a USB flash drive into a bootable installer. It writes an official Ubuntu ISO image to the drive, allowing the same stick to install Linux, run a temporary live desktop, or rescue an existing system. The utility runs on an Ubuntu computer, while the finished drive can boot compatible Windows, macOS, and Linux machines.

The basic process involves downloading an Ubuntu image, choosing a suitable flash drive, writing the image with Startup Disk Creator, and testing the result before installation. This is particularly handy for commuters in Sydney, Melbourne, and Brisbane who may carry a small collection of installers and recovery media rather than download a multi-gigabyte ISO whenever they need one.

Start with the current Ubuntu desktop image from the official Ubuntu download page. Check that the image supports your computer’s processor architecture; most Australian-market PCs use x86-64, while ARM-based devices need an appropriate image and may require a different boot procedure. A large download is best handled over a fixed broadband connection such as NBN, as mobile data allowances can make repeated ISO downloads unnecessarily expensive.

Choose a healthy flash drive with enough space for both the image and temporary installation files. An 8 GB drive is the practical minimum for many Ubuntu images, while 16 GB or 32 GB provides more room and is easier to find in Australian supermarkets, electronics stores, and online marketplaces. Check the drive for existing files before proceeding because creating a startup disk will erase it.

Prepare the Ubuntu image and USB drive

After downloading the ISO, verify it before writing it to USB. Ubuntu publishes SHA-256 checksums for its official images. Open Terminal in the downloaded file’s folder and run a command such as sha256sum ubuntu-version-desktop-amd64.iso, replacing the filename with your actual file. Compare the resulting hash with the checksum listed on the official download page. A matching value confirms that the image has not been corrupted during transfer.

USB 3 drives offer a good balance of speed, price, and capacity, but their sustained write speed matters more than the advertised maximum. Very cheap flash drives may report impressive read speeds while failing during a sustained image write. USB-C is increasingly common on Australian laptops, but some ports support data only through an adapter, and a USB-C hub may prevent the computer from detecting a boot device. A direct USB-A connection is the least troublesome option when troubleshooting.

A second drive can hold unrelated reference material, including a suspended casino guide, while the installation stick remains dedicated to Ubuntu. Local retailers such as Officeworks, JB Hi-Fi, Kogan, and Amazon Australia commonly sell 16 GB and 32 GB options. The Australian Consumer Law provides consumer guarantees for faulty goods, so a drive that repeatedly fails validation should be replaced rather than used as an installer.

Identify the correct device before inserting it into Startup Disk Creator. Run lsblk -d -o NAME,PATH,SIZE,MODEL,TRAN to list storage devices and their sizes, then use a file manager or lsblk -f to inspect mounted partitions. If the USB drive contains data you need, copy it elsewhere first and unmount every partition belonging to it. The Australian Privacy Act 1988 and the Australian Privacy Principles provide a useful benchmark when the drive may have held tax records, client files, photographs, or other sensitive material.

Create the bootable USB with Startup Disk Creator

Open Startup Disk Creator from Ubuntu’s Activities overview. If it is not installed, search for it in Ubuntu Software or App Center, or install the usb-creator-gtk package through Terminal. Administrative access may be required when the application needs to unmount partitions and write directly to the device, so approve the authentication prompt using your own account password.

In the application, select the downloaded Ubuntu ISO under the image or disk image field. Choose the USB flash drive from the device list, taking care to match its size and model rather than selecting an internal SSD. Enter a short label that identifies the stick, such as UBUNTU-24-04, and leave the advanced partition options at their defaults unless you have a specific reason to change them. Select the button for creating the startup disk.

A confirmation message will explain that all data on the selected USB will be deleted. This step is permanent: a USB that previously held backups, media libraries, or work files cannot be recovered through Startup Disk Creator. Read the device name again, confirm that you selected the removable drive, and proceed only when everything matches your intention.

The image-writing process can take several minutes, depending on the ISO size and the speed of the flash drive. Keep the computer awake, plugged into power, and connected directly to the drive. Do not unplug the USB or suspend the session. When the application reports that the startup disk has been created, eject it through Files or GNOME Disks before moving it to the target computer.

Test the live USB before installing

Restart the target computer and open its one-time boot menu. Australian-market Dell systems commonly use F11, HP systems often use F9, and Lenovo and Acer systems commonly use F12; some manufacturers use Escape, F8, or F12. Press the relevant key repeatedly after the firmware logo appears, then select the USB drive from the list. If both legacy and UEFI entries appear, select the UEFI version.

Ubuntu normally offers a “Try or Install Ubuntu” option. Choose the live desktop when you only want to check compatibility, and allow the system to load without touching the internal drive. Test the network connection, trackpad, sound, display scaling, external monitors, and any USB devices you plan to use. Live-session changes are normally discarded when the computer powers off, so the desktop is a test environment rather than a permanent installation.

Ubuntu’s official images generally work with Secure Boot enabled, so avoid disabling that firmware feature as a first response. Some proprietary graphics drivers, particular wireless adapters, and unusual laptop firmware may still cause boot problems. If the USB does not appear, try another port, another USB stick, or the UEFI boot menu. The internal Windows installation is safe at this stage as long as you do not select an install target.

Install Ubuntu from the boot drive

After confirming that the live desktop works, reboot and select the USB again, this time choosing the installation option. The installer can place Ubuntu on an internal drive, alongside Windows, or on another suitable storage device. Back up important data before repartitioning anything. On a BitLocker-encrypted Windows computer, save the recovery key, and disable Windows Fast Startup before changing partitions to reduce the risk of an incomplete hibernated filesystem.

The best choice depends on the machine’s purpose. A dedicated Ubuntu installation provides the full filesystem and predictable updates, while dual boot preserves Windows but requires careful partition sizing. Managed work or school computers may have centrally applied encryption and restrictions, so obtain the owner’s permission before altering them. If the goal is simply to carry Ubuntu between computers, installing to another external SSD can offer more flexibility than using the installer stick itself.

Fix common boot and writing problems

If Startup Disk Creator cannot see the flash drive, connect it directly rather than through a hub, try a different port, and confirm that the device appears in lsblk. Some cheap drives report a serial number that the application misreads; changing the USB port often resets the connection. If writing fails near the end of the process, the drive may be failing or may not support the required image size. Replace it with a reputable drive rather than repeatedly retrying the same hardware.

An ISO that fails its checksum should be downloaded again from the official source. A corrupted image can produce installation errors, missing files, or a failed boot. If the image writes but does not appear in the boot menu, update the computer’s firmware, check that USB booting is enabled, and select the USB explicitly from the firmware menu. GNOME Disks can also restore some disk images, while balenaEtcher is another option for writing an ISO to removable media.

Startup Disk Creator normally creates one installer per USB drive because it replaces the drive’s contents. Ventoy can boot multiple Linux ISO files from a single stick, but it adds configuration steps and is better suited to users who regularly test several distributions. Ubuntu Touch and Android phone images also use different installation methods. Resources such as Android Gyani can explain Android flashing terminology, but those instructions should not be applied to an Ubuntu desktop ISO.


Once the live session has been tested, label the USB with its image version and purpose, keep the matching ISO checksum available, and store the stick somewhere it will not be confused with ordinary data storage. The practical takeaway is to verify the image, use a known-good 16 GB or larger drive, let the writing process finish, and test the live desktop before relying on the USB as your installation or recovery medium.